- 相關推薦
輪胎壓路機簡支式后輪驅動裝置結構設計（II）
輪胎壓路機簡支式后輪驅動裝置結構設計（II）
摘要：本文對YL25C型輪胎壓路機后輪驅動裝置結構設計進行了闡述。在設計過程中，提出3種比較理想的結構方案，并對3種方案進行了詳細的優缺點分析，最終選定了簡支式結構方案。本文對液壓馬達、減速機、軸承等元件的選型也做了比較詳細的計算，對軸的強度進行強度計算與校核、對軸承進行壽命計算分析。運用Pro/E對所有的0部件進行建模，建模完成后進行了干涉分析、運動仿真、結構裝拆順序動畫的制作。還通過Pro/e的有限元分析對軸和機架焊接件進行了有限元分析，針對機架焊接件有限元分析結果，提出機架焊接件結構改進的方案。完成了主要0件的工程圖繪制和加工工藝過程分析。
關鍵詞：輪胎壓路機 后輪驅動裝置 結構設計 Pro/E建模 有限元分析
The Structural Design about the Simple Supported Rear Drive of Tyre Road Roller
Abstrct: The paper expatiates on the structural design about the rear drive device of tyre road roller. The paper puts forward three structures during the design work, then analyzes the advantages and disadvantages of them in detail, finally chooses a simple supported type structure to use in the design. The paper does much calculation work to choose the right model of the components, such as hydraulic motor, reducer and bearing. The paper checks the strength of the shaft and the service life of the bearing by calculation and analysis. All the parts and components of the device are modeled in using Pro/E. The paper analyzes the interference among parts and components, executes the mechanical motion emulation, and works out an animation about the assembled and unassembled process of the device after the modeling work. The paper uses finite element analysis function in the Pro/E to do finite element analysis work on shaft and supported framework, then makes a structural improvement about the supported framework by using the result of finite element analysis work. The paper also works out drawings and process planning of some major parts and components.
Keyword: tyre roller, the rear drive device, structural design, modeling in Pro/E, finite element analysis (FEA)
...
包括：畢業設計圖紙、畢業論文、開題報告、任務書、中期檢查、外文翻譯
【輪胎壓路機簡支式后輪驅動裝置結構設計II】相關文章：
微機式電除塵裝置的研制07-31
簡析輪胎痕跡的簡單認識及偵破技巧09-29
μC/OS-II的多任務信息流與CAN總線驅動05-30
用于植入式裝置的遙測系統設計10-10
移動式氣化裝置的開發及應用05-22
項目驅動式的網絡工程課程設計改革論文07-16