<dfn id="w48us"></dfn><ul id="w48us"></ul>
  • <ul id="w48us"></ul>
  • <del id="w48us"></del>
    <ul id="w48us"></ul>
  • 思科認證網絡設計工程師CCDA認證考試要點

    時間:2024-06-28 08:43:51 思科認證 我要投稿
    • 相關推薦

    思科認證網絡設計工程師CCDA認證考試要點

      200-310 DESGN思科互聯網絡解決方案考試,考試時間為75分鐘,共有55-65道與思科CCDA®認證相關的考題。通過200-310 DESGN考試需要具備思科企業網絡架構網絡設計的基礎知識。獲得CCDA認證的專業人士能夠設計包括涉及為SMB或基礎企業園區及分支網絡提供LAN/WAN技術的可路由、可交換網絡架構及服務。

    思科認證網絡設計工程師CCDA認證考試要點

      1.0 Design Methodologies15%

      1.1 Describe the Cisco Design lifecycle – PBM (plan, build, manage)

      1.2 Describe the information required to characterize an existing network as part of the planning for a design change

      1.3 Describe the use cases and benefits of network characterization tools (SNMP, NBAR, NetFlow)

      1.4 Compare and contrast the top-down and bottom-up design approaches

      2.0 Design Objectives20%

      2.1 Describe the importance and application of modularity in a network

      2.2 Describe the importance and application of hierarchy in a network

      2.3 Describe the importance and application of scalability in a network

      2.4 Describe the importance and application of resiliency in a network

      2.5 Describe the importance and application of concept of fault domains in a network

      3.0 Addressing and Routing Protocols in an Existing Network20%

      3.1 Describe the concept of scalable addressing

      3.1.a Hierarchy

      3.1.b Summarization

      3.1.c Efficiency

      3.2 Design an effective IP addressing scheme

      3.2.a Subnetting

      3.2.b Summarization

      3.2.c Scalability

      3.2.d NAT

      3.3 Identify routing protocol scalability considerations

      3.3.a Number of peers

      3.3.b Convergence requirements

      3.3.c Summarization boundaries and techniques

      3.3.d Number of routing entries

      3.3.e Impact of routing table of performance

      3.3.f Size of the flooding domain

      3.3.g Topology

      3.4 Design a routing protocol expansion

      3.4.a IGP protocols (EIGRP, OSPF, ISIS)

      3.4.b BGP (eBGP peering, iBGP peering

      4.0 Enterprise Network Design20%

      4.1 Design a basic campus

      4.1.a Layer 2/Layer 3 demarcation

      4.1.b Spanning tree

      4.1.c Ether channels

      4.1.d First Hop Redundancy Protocols (FHRP)

      4.1.e Chassis virtualization

      4.2 Design a basic enterprise network

      4.2.a Layer 3 protocols and redistribution

      4.2.b WAN connectivity

      4.2.b(i) Topologies (hub and spoke, spoke to spoke, point to point, full/partial mesh)

      4.2.b(ii) Connectivity methods (DMVPN, get VPN, MPLS Layer 3 VPN, Layer 2 VPN, static IPsec, GRE,VTI)

      4.2.b(iii) Resiliency (SLAs, backup links, QoS)

      4.2.c Connections to the data center

      4.2.d Edge connectivity

      4.2.d(i) Internet connectivity

      4.2.d(ii) ACLs and firewall placements

      4.2.d(iii) NAT placement

      4.3 Design a basic branch network

      4.3.a Redundancy

      4.3.a(i) Connectivity

      4.3.a(ii) Hardware

      4.3.a(iii) Service provider

      4.3.b Link capacity

      4.3.b(i) Bandwidth

      4.3.b(ii) Delay

      5.0 Considerations for Expanding an Existing Network25%

      5.1 Describe design considerations for wireless network architectures

      5.1.a Physical and virtual controllers

      5.1.b Centralized and decentralized designs

      5.2 Identify integration considerations and requirements for controller-based wireless networks

      5.2.a Traffic flows

      5.2.b Bandwidth consumption

      5.2.c AP and controller connectivity

      5.2.d QoS

      5.3 Describe security controls integration considerations

      5.3.a Traffic filtering and inspection

      5.3.b Firewall and IPS placement and functionality

      5.4 Identify traffic flow implications as a result of security controls

      5.4.a Client access methods

      5.4.b Network access control

      5.5 Identify high-level considerations for collaboration (voice, streaming video, interactive video) applications

      5.5.a QoS (shaping vs. policing, trust boundaries, jitter, delay, loss)

      5.5.b Capacity

      5.5.c Convergence time

      5.5.d Service placement

      5.6 Describe the concepts of virtualization within a network design

      5.7 Identify network elements that can be virtualized

      5.7.a Physical elements (chassis, VSS, VDC, contexts)

      5.7.b Logical elements (routing elements, tunneling, VRFs, VLANs)

      5.8 Describe the concepts of network programmability within a network design

      5.8.a APIs

      5.8.b Controllers

      5.8.c Application Centric Infrastructure (ACI)

      5.9 Describe data center components

      5.9.a Server load balancing basics

      5.9.b Blocking vs. non-blocking Layer 2

      5.9.c Layer 2 extension

    【思科認證網絡設計工程師CCDA認證考試要點】相關文章:

    思科認證CUWSS考試要點08-02

    思科認證CLDFND考試要點07-19

    思科認證ARCH考試要點08-15

    思科認證SIMOS考試要點09-06

    思科認證考試認證體系08-26

    思科網絡工程師認證考試09-03

    思科認證網絡工程師CCNA安全認證考試大綱08-22

    思科工程師認證考試09-13

    思科網絡工程師認證考試方法07-22

    思科認證CCNA認證考試簡介06-08

    主站蜘蛛池模板: 99久久精品免费| 91精品啪在线观看国产电影 | 九九在线精品视频专区| 日本精品一区二区三区在线视频一| 国产一区二区精品久久| 无码国产精品一区二区免费模式| 国产午夜亚洲精品理论片不卡| 国产精品青草久久久久婷婷| 亚洲国产精品成人精品无码区| 国产精品乱视频| 欧美精品亚洲精品日韩1818| 精品一区二区三区在线观看视频 | 亚洲精品无码永久在线观看你懂的| 国内精品久久久久久久亚洲| 性色精品视频网站在线观看| 2022国产精品福利在线观看| 日韩精品无码一本二本三本| 中文字幕无码精品亚洲资源网久久 | 久久99国产综合精品| 亚洲av永久无码精品表情包| 日本国产精品久久| 久草热久草热线频97精品| 国产精品免费久久久久电影网| 91探花国产综合在线精品| 日本精品久久久久中文字幕8| 国产精品青草久久久久婷婷| 国产精品一久久香蕉国产线看| 8x福利精品第一导航| 精品久久久久香蕉网| 色偷偷88888欧美精品久久久| 中文国产成人精品久久不卡| 亚洲福利精品电影在线观看| 欧美精品www| 久久久这里有精品中文字幕| 久久久人妻精品无码一区| 日韩一区二区精品观看| 无码国模国产在线无码精品国产自在久国产 | 久99精品视频在线观看婷亚洲片国产一区一级在线 | 毛片a精品**国产| 香蕉99久久国产综合精品宅男自 | 欧美日韩国产中文精品字幕自在自线|